Explosion-proof Indicator Light BD8060-220/380V

1. The ambient air temperature does not exceed +40°C, and the average temperature value within 24 hours does not exceed +35°C. The lower limit of the ambient air temperature is -5°C.

2. The altitude of the installation site does not exceed 2000M.

3. The maximum temperature is +40°C, and the relative humidity of the air does not exceed 50%. The BD8050 explosion-proof indicator light allows for higher relative humidity at lower temperatures, such as 90% at +20°C. Special measures are taken to address occasional condensation due to temperature changes.

4. The pollution level of the signal light is divided into "Pollution Level 2" and "Pollution Level 3" (view details for the supply of explosion-proof indicator light BD8050-SH in red, green, yellow, and white). Technical parameters of the explosion-proof indicator light BD8060-220/380V:

Execution standards: GB3836.1, GB3836.2, GB3836.3, IEC60079-0, IEC60079-1, IEC60079-7, EN60079-0, EN60079-1, EN60079-7

Explosion-proof marking: Exdellc Rated voltage: AC/DC12-36V, AC/DC48-120V, DC220V, AC220-380V Explosion-proof indicator light BD8060-220/380V Rated current: Maximum 15mA

Electrical parameters: 0～60Hz, Maximum power 1W Basic structure: Composed of two parts: the indicator light body and the translucent lamp cover

Installation method: BD8050 explosion-proof indicator light top-mounted type: The indicator light body and translucent lamp cover are directly installed on the shell cover; the indicator light body is installed inside the shell via a rail, and the translucent lamp cover is installed on the shell cover. Ambient temperature: -40℃~+65℃ Terminal wire diameter: 1.5mm2

Explosion-proof indicator light BD8060-220/380V Colors: Red, green, yellow, white. Product features of the explosion-proof indicator light BD8060-220/380V:

1: This device consists of two parts: the indicator light body and the translucent lamp cover component.

2: The housing is made of imported engineering plastic injection molded. The light emitter uses an efficient, long-life, energy-saving LED light source. 3: This device should be used in conjunction with an increased safety enclosure and should not be used alone in explosive gas environments.